![]()
COMPACT, FEATURE-RICH, AND VERSATILE
SWAPPABLE ALL-IN-ONE CONTROLLER
The Smartpack S is designed to meet the control and monitoring requirements of small- to medium-sized telecom and industrial DC power systems.
System status and configuration can be accessed directly through the local display or remotely via the Ethernet port.
Compatible with both Flatpack S and Flatpack2 system platforms, the Smartpack S is suitable for a wide range of applications.
TELECOM – MOBILE / WIRELESS
· RADIO BASE STATIONS/ CELL SITES
· LTE / 4G / WIMAX
· DISTRIBUTED ANTENNA SYSTEMS
· BROADBAND
TELECOM – FIXED
· FIBER OPTICS / FTTX
· MICROWAVE
· CABLE
· BROADBAND
OFFSHORE AND PROCESS INDUSTRY
· SAFETY AND AUTOMATION SYSTEMS (SAS)
| Category | Parameter | Specification |
|---|---|---|
| Basic Information | Model | Smartpack S – Panel Mount |
| Basic Information | Part Number | 242100.415 |
| Input Data | Nominal Voltage | 10–75 VDC |
| Input Data | System Output Grounding | Supports positive, floating, and negative distributions. All inputs are referenced to the shunt. |
| Input Data | Maximum Power Consumption — Relays Not Energized | 3.1 W (display sleep) |
| Input Data | Maximum Power Consumption — All Relays Energized | 5.5 W (display on) |
| System Connections — System Monitors | Voltage Sense / System Voltage Support | 12 VDC, 24 VDC, 48 VDC, and 60 VDC |
| System Connections — System Monitors | Current Sense / Shunt Support | 0–20 mV and 0–60 mV |
| System Connections — System Monitors | Battery Fuse Monitoring | Auxiliary switch NO/NC, pull-up/pull-down |
| System Connections — System Monitors | Load Fuse Monitoring | Auxiliary switch NO/NC, diode matrix pull-up/pull-down |
| System Connections — System Monitors | Ground Fault Detection | Simple bridge circuit detection; tolerance: ±10%; alarm range: 25 kΩ–500 kΩ |
| System Connections — System Monitors | Fan Speed Monitoring | Tacho sensing: 0–65,000 rpm; maximum input voltage: 15 V |
| System Connections — LVD Control | Battery Disconnect | 1 channel; latched or non-latched supported |
| System Connections — LVD Control | Load Disconnect | 1 channel; latched or non-latched supported |
| Inputs and Outputs | Digital Configurations, Inputs #1–6 | Auxiliary switch: NO/NC; temperature sensing for NTC probe |
| Inputs and Outputs | Analog Configurations, Inputs #1–4 | Analog voltage: ±0–10 V; ±4–20 mA current measurement through an external 470 kΩ resistor |
| Inputs and Outputs | Analog Configurations, Inputs #5–6 | Analog voltage: 0–75 V; symmetry measurement |
| Inputs and Outputs | Output Configurations, Outputs #1–6 — Alarms | Six relay dry contacts/Form C; configurable normally open/closed; maximum capacity: 75 V / 2 A / 60 W |
| Inputs and Outputs | Fan Control | Analog voltage: 0–10 V; output current: 0–20 mA; minimum fan input impedance: 10 kΩ |
| Inputs and Outputs | CAN Power Available for Eltek CAN Nodes | 500 mA |
Eltek Monitoring Comparsion:
|
CAN Device |
Start |
End |
Numb of Nodes |
|
Smartpack |
1 |
14 |
14 |
|
Smartpack 2 Basic |
1 |
10 |
10 |
|
Smartpack 2 Master |
11 |
14 |
4 |
|
Smartnode |
17 |
30 |
14 |
|
Battery Monitor |
33 |
46 |
14 |
|
Load Monitor |
49 |
62 |
14 |
|
Flex Monitor |
65 |
78 |
14 |
|
I/O monitors |
81 |
94 |
14 |
|
Mains Monitor |
97 |
110 |
14 |
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Solutions
We provide a complete solutions including site survey, propose professional plan according to customer’s request ,technical support, and maintenance service for Telecommunication Companies in and out of China. We have a competent team and a network of trusted Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios, load and full load and current sharing test to ensure the quality of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction document later to give you a more comprehensive and direct introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent renewal of supply, flexible provided according to different to different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It has already had a certain reputation. We will carefully analyze it. If it is indeed our quality problem, you can rest assured that it will do things according to the contract agreement and will never let you have any after the worries, our service team will be happy to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad quality products within guarantee time.